View PLA110_173241.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PLA110
Single Pole OptoMOS(R) Relays
Load Voltage Load Current Max RON
PLA110 400 150 22
Units V mA
Features * Small 6 Pin DIP Package * Low Drive Power Requirements (TTL/CMOS Compatible) * No Moving Parts * High Reliability * Arc-Free With No Snubbing Circuits * 3750VRMS Input/Output Isolation * FCC Compatible * VDE Compatible * No EMI/RFI Generation * Machine Insertable, Wave Solderable
Description PLA110 is a 1-Form-A solid state relay which uses optically coupled MOSFET technology to provide 3750V of input to output isolation. The efficient MOSFET switches and photovoltaic die use Clare's patented OptoMOS(R) architecture. The optically-coupled input is controlled by a highly efficient GaAIAs infrared LED. The PLA110 can be used to replace mechanical relays and offers the superior reliability associated with semiconductor devices. Because they have no moving parts, they can offer faster, bounce-free switching in a more compact surface mount or through hole package.
Approvals * UL Recognized: File Number E76270 * CSA Certified: File Number LR 43639-10 * BSI Certified: * BS EN 60950:1992 (BS7002:1992) Certificate #:7344 * BS EN 41003:1993 Certificate #:7344
Applications * Telecommunications * Telecom Switching * Tip/Ring Circuits * Modem Switching (Laptop, Notebook, Pocket Size) * Hookswitch * Dial Pulsing * Ground Start * Ringer Injection * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment-Patient/Equipment Isolation * Security * Aerospace * Industrial Controls
Ordering Information Part # PLA110 PLA110S PLA110STR Description 6 Pin Dip (50/Tube) 6 Pin Surface Mount (50/Tube) 6 Pin Surface Mount (1000/Reel)
Pin Configuration
PLA110 Pinout
AC/DC Configuration + Control Control NC 1 2 3 6 5 4 Load Do Not Use Load
PLA110 Pinout
DC Only Configuration + Control Control NC 1 2 3 6 5 4 + Load Load
Switching Characteristics of Normally Open (Form A) Devices
10ms CONTROL
+ 90% LOAD 10% + TON 10%+ TOFF
DS-PLA110-R5
www.clare.com
1
PLA110
Absolute Maximum Ratings (@ 25 C)
Parameter Input Power Dissipation Input Control Current Peak (10ms) Reverse Input Voltage Total Power Dissipation Isolation Voltage Input to Output Operational Temperature Storage Temperature Soldering Temperature DIP Package Surface Mount Package (10 Seconds Max.)
1 2
Min 3750 -40 -40 -
Typ Max Units - 1501 mW 50 mA 1 A 5 V - 8002 mW VRMS +85 C +125 C +260 +220 C C
Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and effect its reliability.
Derate Linearly 1.33 mw/C Derate Linearly 6.67 mw/C
Electrical Characteristics
Parameter Output Characteristics @ 25C Load Voltage (Peak) Load Current (Continuous) AC/DC Configuration DC Configuration Peak Load Current On-Resistance AC/DC Configuration DC Configuration Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics @ 25C Input Control Current Input Dropout Current Input Voltage Drop Reverse Input Voltage Reverse Input Current Common Characteristics @ 25C Input to Output Capacitance Input to Output Isolation Conditions 10ms IL=150mA IL=250mA VL=400V IF=5mA, VL=10V IF=5mA, VL=10V 50V; f=1MHz IL=150mA IF=5mA VR=5V Symbol VL IL IL IL RON RON ILEAK TON TOFF COUT IF IF VF VR IR CI/O VI/O Min -
Typ 25 0.7 1.2 3 -
Max 400 150 250 400 22 7 1 1 0.50
-
Units V mA mA mA A ms ms pF mA mA V V A pF VRMS
5 0.4 0.9 3750
50 1.4 5 10 -
2
www.clare.com
Rev. 5
PLA110
PERFORMANCE DATA*
35 30 Device Count (N)
PLA110 Typical LED Forward Voltage Drop (N=50 Ambient Temperature = 25C) IF = 5mADC
!# !
Device Count (N)
PLA110 Typical On-Resistance Distribution (N=50 Ambient Temperature = 25C) (Load Current = 150mADC; IF = 5mADC)
35 30 Device Count (N) 25 20 15 10 5
PLA110 Typical Blocking Voltage Distribution (N=50 Ambient Temperature = 25C)
25 20 15 10 5 0 1.17 1.19 1.21 1.23 1.25 LED Forward Voltage Drop (V)
# # # # $ % & '
0 441.5 450.5 459.5 468.5 477.5 486.5 Blocking Voltage (V)
On-Resistance ()
PLA110 Typical IF for Switch Operation (N=50 Ambient Temperature = 25C) (Load Current = 150mADC)
25 20 15 10 5 0 0.75 1.05 1.35 1.65 1.95 2.25 LED Current (mA) 25 20 15 10 5 0
PLA110 Typical IF for Switch Dropout (N=50 Ambient Temperature = 25C)
PLA110 Typical Turn-Off Time (N=50 Ambient Temperature = 25C) (Load Current = 100mADC; IF = 5mADC)
25 20
Device Count (N)
Device Count (N)
Device Count (N) 0.75 1.05 1.35 1.65 1.95 2.25
15
10
5
0 0.12 0.17 0.22 0.27 0.32 0.37
LED Current (mA)
Turn-Off (ms)
PLA110 Typical Turn-On Time (N=50 Ambient Temperature = 25C) (Load Current = 100mADC; IF = 5mADC)
25
300
Load Current (mA)
PLA110 Typical Load Current vs. Temperature (N=50 Ambient Temperature = 25C)
DC Configuration
PLA110 Typical On-Resistance vs. Temperature (Load Current = Max rated at Temp.) AC/DC Configuration
25
Device Count (N)
20
15
200 150 100 50 0 -40 -20 0 20 40 60
AC/DC Configuration
10mA 5mA 10mA 5mA
On-Resistance ()
250
5mA
20
10mA
15
10
10
5
5
0 0.23 0.26 0.29 0.32 0.35 0.38
80 100 120
0 -40 -20 0 20 40 60 80 100
Turn-Off (ms)
Temperature (C)
Temperature (C)
PLA110 Typical On-Resistance vs. Temperature (Load Current = Max Rated at Temp.) DC Configuration
10 9 8 7 6 5
PLA110 Typical On Resistance vs. Temp. Load Current=100mA Instantaneous
25
PLA110 Typical Leakage vs. Temperature (Measured across Pins 4 & 6)
0.035 0.030
On-Resistance ()
IF=5mA
20
On-Resistance ()
15
Leakage (A)
IF=5mA
0.025 0.020 0.015 0.010 0.005 0
IF=10mA
10
0 -40 -20 0 20 40 60 80 100
-40
-20
0
20
40
60
80
100
120
-40
-20
0
20
40
60
80
100
Temperature (C)
Temperature (C)
The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department.
Rev. 5
www.clare.com
3
PLA110
PERFORMANCE DATA*
PLA110 Typical Blocking Voltage vs. Temperature
480
0.6 0.5
Turn-On (ms)
PLA110 Typical Turn-On vs. Temperature (Load Current = 100mADC)
5mA
0.3
PLA110 Typical Turn-Off vs. Temperature (Load Current = 100mADC)
Blocking Voltage (VRMS)
475 470 465 460 455 450 -40 -20 0 20 40 60 80 100 Temperature (C)
0.3 0.2 0.1 0 -40 -20 0 20 40 60
10mA
Turn-Off (ms)
0.4
0.25 0.2 0.15 0.1 0.05
IF=5mA
80 100 120
-40
-20
0
20
40
60
80
100
Temperature (C)
Temperature (C)
PLA110 Typical LED Forward Voltage Drop vs. Temperature
LED Forward Voltage Drop (V)
1.8
PLA110 Typical Turn-On vs. LED Forward Current (Load Current = 150mADC)
0.40 0.35
PLA110 Typical Turn-Off vs. LED Forward Current (Load Current = 150mADC)
0.12 0.10
1.6
Turn-Off (ms)
Turn-On (ms)
0.30 0.25 0.20 0.15 0.10 0.05
0.08
1.4
50mA
1.2
0.06
0.04
1.0
10mA 5mA
0.02
0.8 -40 -20 0 20 40 60 80 100 120
0 0 5 10 15 20 25 30 35 40 45 50
0 0 5 10 15 20 25 30 35 40 45 50
Temperature (C)
Forward Current (mA)
Forward Current (mA)
3.000
LED Current (mA)
PLA110 Typical IF for Switch Operation vs. Temperature (Load Current = 100mADC)
3.000
LED Current (mA)
PLA110 Typical IF for Switch Dropout vs. Temperature (Load Current = 100mADC)
150 Load Current (mA) 100 50 0 -50 -100
PLA110 Typical Load Current vs. Load Voltage (Ambient Temperature = 25C) IF = 5mADC
2.500 2.000 1.500 1.000 0.500 0 -40 -20 0 20 40 60 80 100
2.500 2.000 1.500 1.000 0.500 0 -40 -20 0 20 40 60 80 100
-150 -2.5 -2.0 -1.5 -1.0 -0.5
0
0.5 1.0 1.5 2.0 2.5
Temperature (C)
Temperature (C)
Load Voltage (V)
PLA110 Energy Rating Curve
1.2 1.0 Load Current (A) 0.8 0.6 0.4 0.2 0 10s 100s 1ms 10ms 100ms Time
1s
10s 100s
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department.
4
www.clare.com
Rev. 5
PLA110
Mechanical Dimensions
6 Pin DIP Through Hole (Standard)
7.620 .254 (.300 .010) 3.302 (.130) 6.350 .127 (.250 .005) 9.144 .508 (.360 .020)
8.382 .635 (.330 .025) 2.540 .127 (.100 .005)
PC Board Pattern (Top View)
6-.800 DIA. (6-.031 DIA.) 9.144 (.360) 6.350 .127 (.250 .005)
2.540 .127 (.100 .005) 7.620 .127 (.300 .005)
7.239 TYP. (.285)
.457 .076 (.018 .003)
5.080 .127 (.200 .005)
6 Pin DIP Surface Mount ("S" Suffix)
7.620 .254 (.300 .010) 4.445 .127 (.175 .005) 3.302 (.130) .635 TYP. (.025) .254 TYP. (.010) 6.350 .127 (.250 .005)
8.382 .635 (.330 .025) 2.540 .127 (.100 .005)
PC Board Pattern (Top View) 2.540 .127
(.100 .005)
9.525 .254 (.375 .010) 1.905 .127 (.075 .005)
8.305 .127 (.327 .005)
.457 .076 (.018 .003)
1.499 .127 (.059 .005)
Tape and Reel Packaging for 6 Pin Surface Mount Package
330.2 DIA. (13.00) 2.007 .102 1.498 .102 3.987 .102 (.079 .004) (.059 .004) (.157 .004)
Top Cover Tape Thickness .102 MAX. (.004)
6.731 MAX. 1.753 .102 (.265) (.069 .004) .406 MAX. (.016) 7.493 .102 (.295 .004) 12.090 (.476) 4.877 (.192)
1
6
16.002 .305 (.630 .012) 10.100 (.398)
Embossed Carrier
Top Cover Tape
.050R TYP.
11.989 .102 (.472 .004) User Direction of Feed
10.100 .102 (.398 .004)
1.549 .102 (.061 .004)
Embossment
Dimensions mm (inches)
Rev. 5
www.clare.com
5
Worldwide Sales Offices
CLARE LOCATIONS
Clare Headquarters 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE Clare Micronix Division 145 Columbia Aliso Viejo, CA 92656-1490 Tel: 1-949-831-4622 Fax: 1-949-831-4628
EUROPE
European Headquarters CP Clare nv Bampslaan 17 B-3500 Hasselt (Belgium) Tel: 32-11-300868 Fax: 32-11-300890 France Clare France Sales Lead Rep 99 route de Versailles 91160 Champlan France Tel: 33 1 69 79 93 50 Fax: 33 1 69 79 93 59 Germany Clare Germany Sales ActiveComp Electronic GmbH Mitterstrasse 12 85077 Manching Germany Tel: 49 8459 3214 10 Fax: 49 8459 3214 29 Italy C.L.A.R.E.s.a.s. Via C. Colombo 10/A I-20066 Melzo (Milano) Tel: 39-02-95737160 Fax: 39-02-95738829 Sweden Clare Sales Comptronic AB Box 167 S-16329 Spanga Tel: 46-862-10370 Fax: 46-862-10371 United Kingdom Clare UK Sales Marco Polo House Cook Way Bindon Road Taunton UK-Somerset TA2 6BG Tel: 44-1-823 352541 Fax: 44-1-823 352797
ASIA PACIFIC
Asian Headquarters Clare Room N1016, Chia-Hsin, Bldg II, 10F, No. 96, Sec. 2 Chung Shan North Road Taipei, Taiwan R.O.C. Tel: 886-2-2523-6368 Fax: 886-2-2523-6369
SALES OFFICES AMERICAS
Americas Headquarters Clare 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE Eastern Region Clare P.O. Box 856 Mahwah, NJ 07430 Tel: 1-201-236-0101 Fax: 1-201-236-8685 Toll Free: 1-800-27-CLARE Central Region Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 Western Region Clare 1852 West 11th Street, #348 Tracy, CA 95376 Tel: 1-209-832-4367 Fax: 1-209-832-4732 Toll Free: 1-800-27-CLARE Canada Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824
http://www.clare.com
Clare cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in this Clare product. No circuit patent licenses nor indemnity are expressed or implied. Clare reserves the right to change the specification and circuitry, without notice at any time. The products described in this document are not intended for use in medical implantation or other direct life support applications where malfunction may result in direct physical harm, injury or death to a person.
Specification: DS-PLA110-R5 (c)Copyright 2001, Clare, Inc. OptoMOS(R) is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 4/3/01

▲Up To Search▲

Price & Availability of PLA110

	To Download PLA110 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .